BEZAZBESTNE PLETENICE

BEZAZBESTNO PLATNO I TRAKE

BEZAZBESTNE IZOLACIONE
LEPENKE

KLINGERIT BEZAZBESTNI I
RAVNI ZAP. OD KLINGERITA

TEFLON

ZAPTIVAČI ZA PUMPE I
SETOVI ZAPTIVAČA

TEHNIČKI FILC I IZOLACIONE
PLOČE NA BAZI MINERALNE
VUNE I BAZALTA

PEĆARSKI KIT

O FIRMI

 TEFLONSKI POLUPROIZVODI
:: MATERIALI

- čist PTFE;
- PTFE sa staklenim primesama;
- PTFE sa grafitnim primesama;
- PTFE sa ugljeničnim primesama;
- PTFE sa molibden disulfid primesama;
- PTFE sa bronzanim primesama.

:: TABLE

Standardne dimenzije *, mm

300x300;500x500;600x600;1000x1000;1200x1200

Standardne debljine *, mm

1, 2, 3, 4, 5 . . . 100
:: PRESOVANE ŠIPKE
Standardne veličine*, mm
32 38 45 55 60 70 80 90 100 110 120 135 145 160 175 195
35 40 50 58 65 75 85 95 105 115 125 140 150 165 185 200
Dopustive vrednosti tolerancije*, mm
Prečnik up to 40 40÷70 70÷80 80÷100 preko 100
Tolerancija +2 +2.8 +3.2 +4.0 na zahtev
Standardne visine, mm max 230
Dopustive visinske tolerancije*, mm ±10
:: PRESOVANE CEVI
Standardne dimenzije* (D x d, mm)
32x20 60x25 70x50 80x40 90x55 110x75 145x85 195x170
35x25 60x30 70x55 80x45 94x45 115x80 145x100 225x50
38x18 60x35 75x20 80x50 94x55 115x90 145x120 225x190
42x18 60x40 75x25 80x55 94x60 120x40 150x100 235x195
45x25 65x20 75x30 80x60 94x65 120x65 150x105 235x205
50x20 65x25 75x35 85x30 100x30 120x75 160x125 305x285
50x25 65x30 75x40 85x40 100x45 120x100 160x130 380x340
50x30 65x35 75x45 85x50 100x55 120x105 165x140 430x383
50x35 65x45 75x50 85x55 100x60 125x80 174x122 630x577
55x25 65x50 75x55 85x60 100x70 135x75 174x140  
55x30 70x20 75x60 85x65 100x75 135x85 185x155  
55x35 70x25 80x20 90x25 100x80 135x105 185x160  
55x40 70x30 80x25 90x40 100x85 140x75 185x165  
55x45 70x40 80x30 90x45 100x90 140x95 195x155  
60x20 70x45 80x35 90x50 105x65 140x110 195x165  
Dopustive vrednosti tolerancije*, mm
Prečnik do 50 50÷70 70÷90 90÷110 110÷150 preko 150
Tolerancija
D
d

+2.0
-2.0

+2.8
-2.8

+3.6
-3.6

+4.9
-4.0

+7
-6

+max 20
-max 20
Standardne visine, mm max 230
Dozvoljene visinske tolerancije*, mm ±10
*  Ostale vrednosti i tolerancije - na zahtev

Tehničke karakteristike (pdf)

Expanded PTFE sealant for flange joints AVKOSEAL-AL
width=455

AVKOSEAL-AL is a sealant, manufactured from 100% pure expanded PTFE.
It is typically produced as a tape and is less widely used in the form of a cord, plates etc.
The expanded PTFE comprises all the exceptional operation parameters of PTFE plus the additional features acquired in the process of expansion.
To facilitate the fitting AVKOSEAL-AL is provided with a one-sided adhesive backing strip with protective layer made from special paper, which is removed before fitting.
Due to its excellent flexibility and ductility AVKOSEAL follows very easily the shape of the sealed surface, and the adhesive strip enables the quickness of the fitting.
Apart from the flange sealing AVKOSEAL-AL may be successfully used in every other case of static sealing, provided that the working parameters fall into the range PTFE's values.

Sizes and lengths in one reel:

Standard size Standard size Length in
roll
Standard size Standard size Length in
roll
mm Ø mm m mm Ø mm m
  1 50 100 14 x 5.0 14 6 20
3 x 1.5 3 30 60 17 x 6.0 17 5 20
5 x 2.0 5 25 50 20 x 7.0 - 5 20
7 x 2.5 7 20 40 22 x 5.0 - 5 20
10 x 3.0 10 10 40 25 x 5.0 - 5 20
12 x 4.0 12 7.5 25 28 x 5.0 - 5 20

 Advantages of the material

  • Chemical resistance to almost all aggressive mediums
    (?? range 0 - 14);
  • Temperature range: from - 240 °C to +290 °C,
    short periods up to 310 °C;
  • Physiologically safe - without taste and smell, nontoxic, does not contain soluble components, not influenced by microorganisms (moulds);
  • Ensures cleanness of the medium;
  • Hydrophobic, non ageing, resistant to UV - unlimited operational validity;
  • In working conditions AVKOSEAL-AL does not change its hardness and brittleness;
  • Nonflammable and noncombustible;
  • Short fitting time, since AVKOSEAL-AL is ready for application and is not made from sheet material;
  • Quick disassembly: AVKOSEAL-AL may be easily removed, without traces;
  • No need of cutting (moulding) of the sealing;
  • Complete use: no waste material;
  • No need of additional mechanical treatment of the surfaces sealed: AVKOSEAL-AL is easily adapted and compensates deviations from shape and condition of the surface;
  • The flexibility of AVKOSEAL-AL allows sealing of the most complicated configurations;
  • Small storage costs - the material is packed in reels, as only several of them are sufficient for any sealing applications.
width="455"
Tehničke karakteristike (pdf)